NETGEAR FSM7328SNA Administration Manual page 192

NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Under IP Configuration, make the following selections:
• Next to Routing Mode, select the Enable radio button.
• Next to IP Forwarding Mode, select the Enable radio button.
c. Click Apply to enable IP Routing.
5. Create an ACL with ID 101:
a. From the main menu, select Security > ACL > Advanced > IP ACL. A screen similar to the
following displays.
Figure 11-32
b. In the IP ACL ID field of the IP ACL Table, enter 101.
c. Click Add.
6. Create an ACL with ID 102:
a. From the main menu, select Security > ACL > Advanced > IP ACL. A screen similar to the
following displays.
Figure 11-33
11-32
v1.0, October 2009
Access Control Lists (ACLs)