NETGEAR FSM7328SNA Administration Manual page 462

NETGEAR Managed Switches Software Administration Manual, Release 8.0
On Switch D:
To use the Web interface to config PIM-DM, proceed as follows:
1. Enable IP routing on the switch.
a. From the main menu, select Routing >IP >Basic >IP configuration. A screen similar to the
following displays.
Figure 28-28
b. Next to the Routing Mode, select the Enable radio button.
c. Click Apply.
2. Configure 1/0/21 as a routing port and assign IP address to it.
a. From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
similar to the following displays.
Figure 28-29
b. Under IP Interface Configuration, scroll down to interface 1/0/21 and select the checkbox for 1/0/
21. 1/0/21 now appears in the Interface field at the top.
28-21
v1.0, October 2009
PIM