NETGEAR FSM7328SNA Administration Manual page 520

7000 series managed switch administration guide for software version 8.0

Table of Contents

NETGEAR Managed Switches Software Administration Manual, Release 8.0

From the main menu, select Routing > IP v6>Advanced > Prefix Configuration. A screen similar to

the following displays.

Figure 30-16

b. Under IPv6 Interface Selection, select 1/0/24 in the Interface field.

Enter the following information in the IP Interface Configuration.

In the IPv6 Prefix, enter 2001:3::1.

In the Prefix Length, enter 64.

Select Disable in the EUI64 field.

d. Click Add to save the settings.

6. Configure router ID of OSPFv3.

From the main menu, select Routing > OSPFv3 >Basic > OSPFv3 Configuration. A screen similar

to the following displays.

Figure 30-17

b. In the Router ID field, enter 2.2.2.2.

Next to the Admin Mode, select the Enable radio button.

d. Click Apply.

v1.0, October 2009