NETGEAR FSM7328SNA Administration Manual page 174

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 11-10
b. Enter the following information in the VLAN Routing Wizard:
• In the Vlan ID field, enter 200.
• In the IP Address field, enter 192.168.200.1.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 44 twice until U displays. The U specifies that the egress packet is
untagged for the port.
e. Click Apply to save VLAN 200.
4. Enable IP Routing:
a. From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to the
following displays.
Figure 11-11
11-14
v1.0, October 2009
Access Control Lists (ACLs)