NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > IP >Advanced > IP Interface Configuration. A screen
similar to the following displays.
Figure 28-22
b. Under IP Interface Configuration, scroll down to interface 1/0/22 and select the checkbox for
1/0/22. Now 1/0/22 appears in the Interface field at the top.
c.
Enter the following information in the IP Interface Configuration.
•
In the IP address, enter 192.168.6.1.
•
In the Subnet Mask, enter 255.255.255.0.
•
Select Enable in the Routing Mode field.
d.
Click Apply to save the settings.
4.
Enable rip on the interface 1/0/21.
a.
From the main menu, select Routing >RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-23
b. Select 1/0/21 in the Interface field.
c.
Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
PIM
v1.0, October 2009
28-18