NETGEAR Managed Switches Software Administration Manual, Release 8.0
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
6.
Enable DVMRP on the switch.
a.
From the main menu, select Routing > Multicast >DVMRP>Global Configuration. A screen
similar to the following displays.
Figure 31-7
b. Next to the Admin Mode, select the Enable radio button.
c.
Click Apply.
7. Enable DVMRP on the interface.
a.
From the main menu, select Routing > Multicast >DVMRP>Interface Configuration. A screen
similar to the following displays.
Figure 31-8
DVMRP
v1.0, October 2009
31-11