NETGEAR FSM7328SNA Administration Manual page 88

NETGEAR Managed Switches Software Administration Manual, Release 8.0
h. In the VLAN Name field, enter VLAN20.
i. Select Static in the VLAN Type field.
j. Click Add.
2. Add ports to the VLAN10 and VLAN20.
a. From the main menu, select Switching > VLAN >Advanced > VLAN Membership. A screen
similar to the following displays.
Figure 6-4
b. Select 10 in the VLAN ID field.
c. Click the Unit 1. The Ports display.
d. Click the gray box under port 1 and 2 until T displays. The T specifies that the egress packet is
tagged for the port.
e. Click Apply.
f. From the main menu, select Switching > VLAN >Advanced > VLAN Membership. A screen
similar to the following displays.
Figure 6-5
6-4
v1.0, October 2009
VLAN Routing