NETGEAR FSM7328SNA Administration Manual page 302

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Select Force Authorized in the Control Mode field.
d. Click Apply to save settings.
6. Enable dot1x on the switch.
a. From the main menu, select Security > Port Authentication > Server Configuration. A screen
similar to the following displays.
Figure 15-18
b. Next to the Administrative Mode, select the Enable radio button.
c. Select dot1xList in the Login field.
d. Click Apply to save settings.
7. Configure RADIUS authentication server.
a. From the main menu, select Security > Management Security > Server Configuration. A screen
similar to the following displays.
Figure 15-19
b. In the Server Address, enter 10.100.5.17.
c. Select Yes in the Secret Configured field.
d. In the Secret field, enter 123456.
15-18
v1.0, October 2009
Security Management