NETGEAR FSM7328SNA Administration Manual page 336

NETGEAR Managed Switches Software Administration Manual, Release 8.0
a. From the main menu, select Security > Control > DHCP Snooping Global Configuration. A screen
similar to the following displays.
Figure 15-63
b. Select DHCP Snooping Mode as Enable.
c. Click Apply. At the end of this configuration a screen similar to
2. Enable DHCP snooping in a VLAN.
a. From the main menu, select Security > Control > DHCP Snooping Global Configuration. A screen
similar to the following displays.
Figure 15-64
b. In the VLAN Configuration table, select VLAN ID as 1.
c. In the VLAN Configuration table, select DHCP Snooping Mode as Enabled. A screen similar to
the one shown in
15-52
Figure 15-65 displays.
v1.0, October 2009
Figure 15-64 is displayed.
Security Management