NETGEAR FSM7328SNA Administration Manual page 460

NETGEAR Managed Switches Software Administration Manual, Release 8.0
5. Enable rip on the interface 1/0/22.
a. From the main menu, select Routing > RIP >Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 28-24
b. Select 1/0/22 in the Interface field.
c. Next to the RIP Admin Mode, select the Enable radio button.
d. Click Apply.
6. Enable mulicast globally.
a. From the main menu, select Routing > Multicast >Global Configuration. A screen similar to the
following displays.
Figure 28-25
b. Next to the Admin Mode, select the Enable radio button.
c. Click Apply.
7. Enable PIM-DM globally.
28-19
v1.0, October 2009
PIM