NETGEAR FSM7328SNA Administration Manual page 123

NETGEAR Managed Switches Software Administration Manual, Release 8.0
Figure 8-18
b. Under IP Interface Configuration, scroll down to interface 2/0/11 and select the checkbox for that
interface. 2/0/11 now appears in the Interface field at the top.
c. Enter the following information in the IP Interface Configuration:
• In the IP Address field, enter 192.168.10.1.
• In the Network Mask field, enter 255.255.255.0.
• Select Enable in the Admin Mode field.
d. Click Apply to save the settings.
3. Assign IP address 192.168.20.1 to the port 2/0/19:
a. From the main menu, select Routing > IP > Advanced> IP Interface Configuration. A screen
similar to the following displays.
Figure 8-19
b. Under IP Interface Configuration, scroll down to interface 2/0/19 and select the checkbox for that
interface. 2/0/19 now appears in the Interface field at the top.
c. Enter the following information in the IP Interface Configuration:
OSPF
v1.0, October 2009
8-18