NETGEAR Managed Switches Software Administration Manual, Release 8.0
Table 32-1. RADIUS Attributes for Configuring Captive Portal Users (continued)
RADIUS Attribute No.
WISPr-Max-
14122,
Bandwidth-Up
7
WISPr-Max-
14122,
Bandwidth-Down
8
CLI: Configuiring RADIUS as the Verification Mode
(Netgear Switch ) (Config-CP 1)#radius-auth-server Default-RADIUS-Server
(Netgear Switch ) (Config-CP 1)#verification radius
Web Interface: Configuring RADIUS as the Verification Mode
1.
From the main menu, select Security > Control >Captive Portal> CP Configuration. A screen similar to
the following displays.
Figure 32-7
2.
Under Captive Portal Configuration, scroll down to CP ID 1 and select the CP 1 checkbox. Now CP 1
appears in the CP ID field at the top.
3.
Enter the following information in the Captive Portal Configuration.
•
Select RADIUS from the Verification field.
•
In the Radius Auth Server field, enter the radius server name Default-RADIUS-Server.
4.
Click Apply.
Captive Portal
Description
Maximum client transmit rate (b/s).
Limits the bandwidth at which the
client can send data into the
network. If the attribute is 0 or not
present then use the value
configured for the captive portal.
Maximum client receive rate (b/s).
Limits the bandwidth at which the
client can receive data from the
network. If the attribute is 0 or not
present then use the value
configured for the captive portal.
v1.0, October 2009
Range
Usage
Integer
Optional
Integer
Optional
Default
0
0
32-9