NETGEAR Managed Switches Software Administration Manual, Release 8.0
a.
From the main menu, select Routing > IP v6>Advanced > Interface Configuration. A screen similar
to the following displays.
Figure 30-4
b. Under IPv6 Interface Configuration, scroll down to interface 1/0/1 and select the checkbox for 1/0/
1. then select the checkbox for 1/0/13.
c.
Enter the following information in the IPv6 Interface Configuration.
•
Select Enable in the IPv6 Mode field.
•
Select Enable in the Routing Mode field.
•
Select Enable in the Admin Modefield.
d. Click Apply to save the settings.
4. Assign IPv6 address to 1/0/1.
MLD
v1.0, October 2009
30-6