NETGEAR FSM7328SNA Administration Manual page 527

NETGEAR Managed Switches Software Administration Manual, Release 8.0
e. Click Apply
3. Assign PVID to port 1/0/1 and 1/0/24.
a. From the main menu, select Switching > VLAN> Advanced > Port PVID Configuraton. A screen
similar to the following displays.
Figure 30-26
b. Under PVID Configuration, scroll down to interface 1/0/1 and select the checkbox for 1/0/1. Then
scroll down to the interface 1/0/24 and select the checkbox for 1/0/24.
c. In the PVID Configuration, PVID (1 to 4093) field, enter 300.
d. Click Apply to save the settings.
4. Enable MLD Snooping on the switch.
a. From the main menu, select Routing > Multicast >MLD Snooping > Configuration. A screen
similar to the following displays.
Figure 30-27
b. Next to the MLD Snooping Admin Mode, select the Enable radio button.
MLD
v1.0, October 2009
30-22