Hotspot Configuration - Digi TX54 User Manual

Hotspot

Hotspot configuration

This section provides information about enabling and configuring the default hotspot that is provided
with your TX54 installation, as well as creating a new hotspot and configuring the type of
authentication mode you select for your hotspot.
This section contains the following topics:
Enable hotspot using the default configuration
Change the default hotspot SSID
Change the default hotspot IP address and subnet
Change the default hotspot bandwidth limits
Add an Ethernet port to the default hotspot
Use policy routes with hotspot
Create a new hotspot
Configure the hotspot to use local shared password authentication
Configure the hotspot to use RADIUS shared password authentication
Configure the hotspot to use RADIUS users authentication
Configure the hotspot to use HotspotSystem authentication
TX54 User Guide
Hotspot configuration
290
295
297
300
302
304
305
318
320
324
328
289