A
REGISTER REFERENCE
The ADSP-21367/8/9 and ADSP-2137x processors have general-purpose
and dedicated registers in each of their functional blocks. The register ref-
erence information for each functional block includes bit definitions,
initialization values, and memory-mapped addresses (for I/O processor
registers). Information on each type of register is available at the following
locations:
•
"I/O Processor Registers" on page A-2
•
"External Port Registers" on page A-10
•
"Serial Port Registers" on page A-29
•
"Serial Peripheral Interface Registers" on page A-52
•
"Input Data Port Registers" on page A-65
•
"Pulse Width Modulation Registers" on page A-78
•
"Sample Rate Converter Registers" on page A-97
•
"Sony/Philips Digital Interface Registers" on page A-86
•
"DAI/DPI Registers" on page A-109
•
"UART Control and Status Registers" on page A-118
•
"Two Wire Interface Registers" on page A-130
•
"Precision Clock Generator Registers" on page A-155
•
"Peripheral Interrupt Priority Control Registers" on page A-164
ADSP-21368 SHARC Processor Hardware Reference
A-1