Safety Instructions - HBM Spider8 Operating Manual

4

Safety instructions

Use in accordance with the regulations
The Spider8 with its connected transducers must be used
exclusively for measurement tasks and directly related control tasks.
Use for any additional purpose shall be deemed to be not in
accordance with the regulations.
In the interests of safety, the instrument should only be operated as
descibed in the Operating Manual. It is also essential to observe the
appropriate legal and safety regulations for the application
concerned during use. The same applies to the use of accessories.
General dangers due to non-observance of the safety
instructions
The Spider8 corresponds to the state of the art and is safe to
operate. The instrument can give rise to further dangers if it is
inappropriately installed and operated by untrained personnel.
Everyone involved with the installation, commissioning, maintenance
or repair of the instrument must have read and understood the
Operating Manual and in particular the technical safety instructions.
Electrical connection
The Spider8 must not be used in combination with external devices
(PC, transducer, voltage sources, etc.), if there are any potential
risks emanating from these devices (shock currents during a fault
condition).
Spider8