Safety Instructions - HBM PaceLine CLP Mounting Instructions

Safety instructions

1 Safety instructions
Intended use
Force transducers of the CLP type series are solely designed for measuring
static and dynamic compressive forces within the load limits specified by the
technical data for the respective maximum capacities. Any other use is not ap­
propriate.
To ensure safe operation, always comply with the regulations in the mounting
and operating instructions, together with the following safety rules and regula­
tions, and the data specified in the technical data sheets. It is also essential to
observe the applicable legal and safety regulations for the relevant application.
The force transducers are not intended for use as safety components. Please
also refer to the "Additional safety precautions" section. Proper and safe opera­
tion of force transducers requires proper transportation, correct storage, setup
and mounting, and careful operation.
Operating personnel
Mounting and operation of the force transducer must only be carried out by fully
qualified personnel. Qualified personnel in this respect means persons en­
trusted with installing, mounting, starting up and operating the product, who are
familiar with the operation of the force transducer and possess the appropriate
qualifications for their function.
Load-carrying capacity limits
The information in the technical data sheets must be complied with when using
force transducers. The respective specified maximum loads in particular must
never be exceeded. The following limits set out in the specifications must not
be exceeded:
S Limit loads
S Lateral load limits
S Breaking loads
S Permissible dynamic loads
S Temperature limits
CLP 3
A03616_04_YI0_02 HBM: public