Example Of A Master/Slave Configuration - HBM GEN Series User Manual

2.2.3

Example of a Master/Slave configuration

The following diagram shows an example of a Master/Slave configuration with a master driving
four slave mainframes.
Figure 2-14: Example of a Master/Slave configuration with four slave mainframes
A Master mainframe
B Slave mainframes
C Fiber-optic cable
1 Connect the Master/Slave board connector labelled M/S, OUT 1 of the master mainframe
to the top connector labelled M/S IN of the Master/Slave board of the first slave mainframe.
2 Connect the Master/Slave board connector labelled M, OUT 2 of the master mainframe to
the top connector labelled M/S IN of the Master/Slave board of the second slave mainframe.
3 Connect the Master/Slave board connector labelled M, OUT 3 of the master mainframe to
the top connector labelled M/S IN of the Master/Slave board of the third slave mainframe.
4 Connect the Master/Slave board connector labelled M, OUT 4 of the master mainframe to
the top connector labelled M/S IN of the Master/Slave board of the fourth slave mainframe.
I2710-1.0 en 25