Typical Operating Procedure; Measurement Example - HBM PMX Operating Manual

85
Quick Start

10.1 Typical operating procedure

10.1.1Measurement example

The easiest way to configure the PMX measuring amplifier and its measure-
ment channels is via the PMX web browser. The sensors, Ethernet cable and
voltage supply must be properly connected (see Sections 7.3 and 7.2).
Connect the PMX to a PC (HOST) (see Section 9.3), to see the device over-
view.
The entire device, with all its measurement cards and signals, as well as all
the device information, is realized here.
Switch to the Administrator level (may be password-protected), then via
the menu button to > Settings > Amplifier.
Alternatively, clicking on the required channel or function (e.g. LIMIT
SWITCHES) directly calls up the corresponding settings menu. This requires
authorization for the respective user levels.
A3257−2.0 en/de/fr