Configuring And Running A Basic Test; Ex23-R Ethernet Switch - HBM SomatXR CX23-R User Manual

CX23-R and EX23-R
1.2.2 Configuring and running a basic test
1. Open the web-based interface at the default IP address 192.168.100.101. In
the header, click the Setup button to navigate to the Test configuration
section.
2. In the Task pane, select Setup, then click the New button to define a new test
setup. Edit the setup name and description as desired. The default name is
"test_name."
3. In the Task pane, select Input channels, then click the Add button. Select the
desired inputs and click OK. New channels show in the All input channels tab
of the grid.
4. Click the Save button in the header or Task pane to save changes.
5. In the header, click the Control button to navigate to the Test and data control
section. In the Task pane, Test control shows.
6. To view real time data, select a check box by a name in the Channels panel. A
chart for that channel shows in the Display Views panel.
7. In the Task pane, click Start to run the test. The yellow LED flashes in the
status bar of the web interface and on the unit. Real time data shows in the
channel chart during the test run.
8. Click Stop to end the test run.
9. To download the SIE data file, click the file name in the Test run statistics
panel.
1.3 EX23-R Ethernet switch
Use the EX23-R Ethernet Switch to network SomatXR modules with other devices
such as cameras. Use the power over Ethernet (PoE) ports to provide power to
compatible network devices.
The EX23-R is designed to be used straight out of the box.
a4275-8.0 en HBM: public
1 Getting started
19