Switch Features
Front Panel Features
Figure 2
1
1
2
3
Figure 2: Edge Switch 2/12 front panel features
Power and System Error LEDs
The PWR LED, as shown in
facility AC power and powered on. If the LED extinguishes, a facility power
source, power cord, or power distribution failure is indicated.
The ERR LED, as shown in
event requiring immediate operator attention, such as a FRU failure. The LED
remains illuminated as long as an event is active. The LED extinguishes when the
Clear System Error Light function is selected from the Element Manager.
The ERR LED blinks if unit beaconing is enabled. An illuminated LED
(indicating a failure) takes precedence over unit beaconing. The LED also blinks
(at twice the beaconing rate) when the IML/RESET button is pressed and held for
more than three seconds.
20
on page 20 shows the front panel controls, connectors, and indicators.
4
3
2
5
PWR LED (green)
ERR LED (amber)
Ethernet LAN connector 10/100
6
IML/RESET
4
SFP fiber optic connectors
5
Port LEDs
6
Figure
2, illuminates when the switch is connected to
Figure
2, illuminates when the switch detects an
Edge Switch 2/12 Installation Guide