Telnet Ipv6 - HP Enterprise FlexFabric 12900E Series Command Reference Manual

Examples
# Set the source IPv4 address to 1.1.1.1 for outgoing Telnet packets.
<Sysname> system-view
[Sysname] telnet client source ip 1.1.1.1
Related commands
display telnet client configuration

telnet ipv6

Use
telnet ipv6
Syntax
telnet ipv6
[ port-number ] [ vpn-instance vpn-instance-name ] [ source { interface
interface-type interface-number | ipv6 ipv6-address } | dscp dscp-value ] *
Views
User view
Predefined user roles
network-admin
Parameters
remote-host
case-insensitive string of 1 to 253 characters. Valid characters include letters, digits, hyphens (-),
underscores (_), and dots (.).
-i interface-type interface-number
This option is required when the remote host address is a link-local address. When the server
address is a global unicast address, you cannot specify this option.
port-number
range is 0 to 65535 and the default is 23.
vpn-instance vpn-instance-name
host belongs. The
case-sensitive string of 1 to 31 characters. If the remote host belongs to the public network, do not
specify this option.
: Specifies a source IPv6 address or source interface for outgoing Telnet packets. If you do
source
not specify this option, the device uses the primary IPv6 address of the output interface for the route
to the server as the source address.
interface interface-type interface-number
primary IPv6 address of the interface will be used as the source IPv6 address for outgoing Telnet
packets.
ipv6 ipv6-address
dscp dscp-value
The default is 48.
Usage guidelines
To terminate the current Telnet connection, press Ctrl+K or execute the
Examples
# Telnet to the host at 5000::1.
to Telnet to a host in an IPv6 network.
remote-host
: Specifies the IPv6 address or host name of a remote host. A host name can be a
: Specifies the TCP port number for the Telnet service on the remote host. The value
vpn-instance-name
: Specifies the source IPv6 address for outgoing Telnet packets.
: Specifies a DSCP value for outgoing Telnet packets. The value range is 0 to 63.
[ -i interface-type
: Specifies the interface for sending Telnet packets.
: Specifies the MPLS L3VPN instance to which the remote
argument represents the VPN instance name, a
: Specifies the source interface. The
75
interface-number
command.
quit
]