Ipv6 Nd Detection Enable - HP FlexNetwork 7500 Series Command Reference Manual

Table 95 Command output
Field
Interface
Packets dropped

ipv6 nd detection enable

Use ipv6 nd detection enable to enable ND attack detection. This feature checks the ND message
validity.
Use undo ipv6 nd detection enable to disable ND attack detection.
Syntax
ipv6 nd detection enable
undo ipv6 nd detection enable
Default
ND attack detection is disabled.
Views
VLAN view
Predefined user roles
network-admin
mdc-admin
Examples
# Enable ND attack detection for VLAN 10.
<Sysname> system-view
[Sysname] vlan 10
[Sysname-vlan10] ipv6 nd detection enable
ipv6 nd detection trust
Use ipv6 nd detection trust to configure an interface as an ND trusted interface.
Use undo ipv6 nd detection trust to restore the default.
Syntax
ipv6 nd detection trust
undo ipv6 nd detection trust
Default
All interfaces are ND untrusted interfaces.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Description
Input interface of the ND messages.
Number of ND messages dropped by ND attack detection.
642