Ipv6 Multicast Routing-Enable; Reset Ipv6 Multicast Forwarding-Table - HP 6125XLG Command Reference Manual

[Sysname] ipv6 multicast longest-match

ipv6 multicast routing-enable

Use ipv6 multicast routing-enable to enable IPv6 multicast routing.
Use undo ipv6 multicast routing-enable to disable IPv6 multicast routing.
Syntax
ipv6 multicast routing-enable
undo ipv6 multicast routing-enable
Default
IPv6 multicast routing is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
You must enable IPv6 multicast routing before you can execute other Layer 3 IPv6 multicast commands.
The device does not forward any IPv6 multicast packets before IPv6 multicast routing is enabled.
Examples
# Enable IPv6 multicast routing.
<Sysname> system-view
[Sysname] ipv6 multicast routing-enable

reset ipv6 multicast forwarding-table

Use reset ipv6 multicast forwarding-table to clear forwarding entries from the IPv6 multicast forwarding
table.
Syntax
reset ipv6 multicast forwarding-table { { ipv6-source-address [ prefix-length ] | ipv6-group-address
[ prefix-length ] | incoming-interface { interface-type interface-number } } * | all }
Views
User view
Predefined user roles
network-admin
Parameters
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address, in the range of FFxy::/16, where "x" and
"y" represent any hexadecimal number from 0 to F.
132