Ipv6 Basics Configuration Task List - HP 3600 v2 Series Configuration Manual

RFC 2460, Internet Protocol, Version 6 (IPv6) Specification
•
RFC 2464, Transmission of IPv6 Packets over Ethernet Networks
•
• RFC 2526, Reserved IPv6 Subnet Anycast Addresses
RFC 2894, Router Renumbering for IPv6
•
RFC 3307, Allocation Guidelines for IPv6 Multicast Addresses
•
RFC 3513, Internet Protocol Version 6 (IPv6) Addressing Architecture
•
RFC 4191, Default Router Preferences and More-Specific Routes
•
• RFC 4443, Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6)
Specification
RFC 4861, Neighbor Discovery for IP Version 6 (IPv6)
•
RFC 4862, IPv6 Stateless Address Autoconfiguration
•

IPv6 basics configuration task list

Task
Configuring basic IPv6
functions
Configuring IPv6 ND
Configuring path MTU
discovery
Configuring IPv6 TCP properties
Configuring ICMPv6 packet sending
Enabling IPv6
Configuring an IPv6 global unicast address
Configuring an IPv6 link-local address
Configure an IPv6 anycast address
Configuring a static neighbor entry
Configuring the maximum number of neighbors dynamically
learned
Setting the age timer for ND entries in stale state
Configuring parameters related to RA messages
Configuring the maximum number of attempts to send an NS
message for DAD
Configuring ND snooping
Enabling ND proxy
Configuring a static path MTU for a specific IPv6 address
Configuring the aging time for dynamic path MTUs
Configuring the maximum ICMPv6 error packets sent in
an interval
Enabling replying to multicast echo requests
Enabling sending ICMPv6 time exceeded messages
Enabling sending ICMPv6 destination unreachable
messages
122
Remarks
Required
Required to
configure
one
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional