Protocols And Standards; Ipv6 Basics Configuration Task List - HP 10500 Series Configuration Manual

Protocols and standards

RFC 1881, IPv6 Address Allocation Management
•
RFC 1887, An Architecture for IPv6 Unicast Address Allocation
•
RFC 1981, Path MTU Discovery for IP version 6
•
• RFC 2375, IPv6 Multicast Address Assignments
RFC 2460, Internet Protocol, Version 6 (IPv6) Specification
•
RFC 2464, Transmission of IPv6 Packets over Ethernet Networks
•
RFC 2526, Reserved IPv6 Subnet Anycast Addresses
•
RFC 2894, Router Renumbering for IPv6
•
• RFC 3307, Allocation Guidelines for IPv6 Multicast Addresses
RFC 3513, Internet Protocol Version 6 (IPv6) Addressing Architecture
•
RFC 4191, Default Router Preferences and More-Specific Routes
•
• RFC 4443, Internet Control Message Protocol (ICMPv6) for the Internet Protocol Version 6 (IPv6)
Specification
RFC 4861, Neighbor Discovery for IP Version 6 (IPv6)
•
• RFC 4862, IPv6 Stateless Address Autoconfiguration

IPv6 basics configuration task list

Complete the following tasks to perform IPv6 basics configuration:
Task
Configuring basic IPv6 functions
Configuring IPv6 ND
Configuring path MTU discovery
Configuring IPv6 TCP properties
Enabling IPv6
Configuring an IPv6 global unicast address
Configuring an IPv6 link-local address
Configure an IPv6 anycast address
Configuring a static neighbor entry
Configuring the maximum number of neighbors
dynamically learned
Setting the age timer for ND entries in stale state
Configuring parameters related to RA messages
Configuring the maximum number of attempts to send
an NS message for DAD
Configuring a static path MTU for a specified IPv6
address
Configuring the aging time for dynamic path MTUs
113
Remarks
Required.
Required to
configure
one.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.
Optional.