Ipv6 Basics Configuration Commands; Display Ipv6 Fib - HP A5120 EI Series Command Reference Manual

IPv6 basics configuration commands

display ipv6 fib

Syntax
display ipv6 fib [ slot slot-number ] [ ipv6-address ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
slot-number: Displays the IPv6 forwarding information base (FIB) entries of a specified device in an IRF. If
no IRF is formed, the IPv6 FIB entries of the current device are displayed only. The slot-number argument
indicates the member ID of the device. If the switch does not support IRF, the slot-number argument must
be 1.
ipv6-address: Displays the IPv6 FIB entries containing the specified destination IPv6 address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipv6 fib command to display IPv6 FIB entries. If no argument is specified, all IPv6 FIB
entries will be displayed.
The device looks up a matching IPv6 FIB entry for forwarding an IPv6 packet.
Examples
# Display all IPv6 FIB entries.
<Sysname> display ipv6 fib
FIB Table:
Total number of Routes : 1
Flag:
U:Useable
Destination:
NextHop
Label
TimeStamp
G:Gateway H:Host
::1
: ::1
: NULL
: Date- 7/14/2007, Time- 15:17:15
B:Blackhole D:Dynamic
136
S:Static
PrefixLength : 128
Flag : HU
Tunnel ID : 0