Lldp-Med Topology Change Notification - HP ProCurve Management And Configuration Manual

N o t e
Class 3 (Communication Devices): These devices are typically IP
■
phones or end-user devices that otherwise support IP media and offer
all Class 1 and Class 2 features, plus location identification and
emergency 911 capability, Layer 2 switch support, and device infor­
mation management.
LLDP-MED Operational Support. The switches covered in this guide offer
two configurable TLVs supporting MED-specific capabilities:
medTlvEnable (for per-port enabling or disabling of LLDP-MED opera­
■
tion)
medPortLocation (for configuring per-port location or emergency call
■
data)
LLDP-MED operation also requires the port speed and duplex TLV
(dot3TlvEnable; page 14-52), which is enabled in the default configuration.

LLDP-MED Topology Change Notification

This optional feature provides information an SNMP application can use to
track LLDP-MED connects and disconnects.
Configuring for Network Management Applications
LLDP (Link-Layer Discovery Protocol)
14-55