3.4.8. Replacement of SMB battery
NOTE!
The SMB lithium battery lifetime can be extended significantly during a production break.
Activate sleep mode in IRC5 by a service routine that is described in Operating manual –
IRC5 with FlexPendant, chapter Battery shutdown service routine.
Location of SMB battery
The SMB battery (SMB = serial measurement board) is located on the left hand side of the
frame as shown in the figure below.
xx0600003444
A
B
C
D
Required equipment
Equipment, etc.
Battery pack
Standard toolkit
Circuit Diagram
3HAC026876-001 Revision: F
Cover, battery box
Battery pack
Cable, battery
Battery holder
Spare part no.
3HAC16831-1
-
-
3HAC025744-001
3 Maintenance
3.4.8. Replacement of SMB battery
Note
Battery includes protection circuits. Replace it
only with a given spare part number or an ABB
approved equivalent.
The content is defined in the section
toolkit on page
409.
See the chapter
Circuit
diagram.
Continues on next page
Standard
183