Replacement Of Smb Battery - ABB IRB 1410 Product Manual

3 Maintenance

3.3.2 Replacement of SMB battery

3.3.2 Replacement of SMB battery
Location of SMB battery unit
The SMB battery unit is located inside the robot base, as shown in the figure below.
xx1300002448
A
B
Continues on next page
76
Note
The battery low alert (38213 Battery charge low) is displayed when the battery
needs to be replaced. The recommendation to avoid an unsynchronized robot
is to keep the power to the controller turned on until the battery is to be replaced.
For an SMB board with 3-pole battery contact (RMU101 3HAC044168-001 or
RMU102 3HAC043904-001), the lifetime of a new battery is typically 36 months.
For an SMB board with 2-pole battery contact, the typical lifetime of a new battery
is 36 months if the robot is powered off 2 days/week or 18 months if the robot is
powered off 16 h/day. The lifetime can be extended for longer production breaks
with a battery shutdown service routine. See Operating manual - IRC5 with
FlexPendant for instructions.
WARNING
See instructions for batteries,
SMB connection
SMB battery RMU
© Copyright 2006-2018 ABB. All rights reserved.
Safety risks during handling of batteries on page
A
35.
B
C
Product manual - IRB 1410
3HAC026320-001 Revision: N