ABB IRB 6640 Product Manual page 166

3 Maintenance
3.4.1. Type of oil in gearboxes
Continued
Rinsing the gearbox
Depending on which types of oil are mixed and which type of oil shall be filled in the gearbox
after rinsing, use the appropriate procedure.
The same applies if the type of oil shall be changed in the gearbox.
NOTE!
The explanation given for Kyodo Yushi TMO 150 also applies to Shell Tivela S 150.
The explanation given for Mobilgear 600 XP320 also applies to Mobil Gearlube X320.
Kyodo Yushi TMO 150 mixed with Optimol Optigear RMO 150/Optigear RO 150
Use this procedure to rinse the contaminated gearbox if the oil types Kyodo Yushi TMO 150
and Optimol Optigear RMO 150/Optigear RO 150 are mixed.
Kyodo Yushi TMO 150 mixed with Mobilgear 600 XP320
Use this procedure to rinse the contaminated gearbox if the gearbox shall contain Kyodo
Yushi TMO 150 and it is mixed with Mobilgear 600 XP320.
Equipment
Equipment
Label set
Oil change equipment
164
• Flush the gearbox properly three times with the correct type of oil. Use a service
program when flushing.
• Refill the gearbox with the correct type of oil.
•
Flush the gearbox properly three times with Kyodo Yushi TMO 150. Use a service
program when flushing.
•
Refill the gearbox with Kyodo Yushi TMO 150.
Art. no.
See Spare Parts.
3HAC021745-001
Note
Includes small labels for each gearbox
and the complete label to be fitted at the
robot base.
NOTE!
The correct labels must be fitted to the
robot in case of changing of oil types!
Includes pump with outlet pipe.
3HAC026876-001 Revision: F