Standard Toolkit - ABB IRB 6640 Product Manual

7.6. Standard toolkit

General
All service (repairs, maintenance and installation) procedures contain lists of tools required
to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools that are
considered standard are gathered in the Standard toolkit and defined in the table below.
This way, the tools required are the sum of the Standard toolkit and any tools listed in the
instruction.
Contents, standard toolkit
Qty
1
1
1
1
1
1
1
2
1
1
1
1
3HAC026876-001 Revision: F
Tool
Ring-open-end spanner 8-19 mm
Socket head cap 5-17 mm
Torx socket no: 20-60
Box spanner set
Torque wrench 10-100 Nm
Torque wrench 75-400 Nm
Ratchet head for torque wrench 1/2
Hexagon-headed screw M10x100
Socket head cap no: 14, socket 40 mm bit L 100 mm
Socket head cap no: 14, socket 40 mm bit L 20 mm
Socket head cap no: 6, socket 40 mm bit L 145 mm
Socket head cap no: 6, socket 40 mm bit L 220 mm
7 Reference information
7.6. Standard toolkit
Rem.
To be shortened to 12 mm
409