Inspection, Signal Lamp (Option) - ABB IRB 6640 Product Manual

3.3.15. Inspection, signal lamp (option)

Location of signal lamp
The signal lamp is located as shown in the figure below. Note that the position can differ
depending on how the customer harness for axis 4-6 is mounted. See assembly drawing on
the current harness for alternative positioning.
xx0600003071
A
B
C
D
E
Required equipment
Equipment, etc.
Signal lamp
Standard toolkit
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
3HAC026876-001 Revision: F
UL signal lamp
Clamp
Cable strap, outdoor
Motor, axis 3
Attachment screw, M6x8 quality 8-A2F(2 pcs)
Art. no.
3HAC10830-1
-
3 Maintenance
3.3.15. Inspection, signal lamp (option)
Note
To be replaced in case of detected
damage.
The content is defined in the section
Standard toolkit on page
These procedures include
references to the tools required.
Continues on next page
409.
159