Initial Settings Procedures Using Embedded Web Server; Preparations For Settings On The Embedded Web Server; Change The System Administrator's Password; Set Eip - Xerox VersaLink C405 Supplementary Manual

Initial Settings Procedures
Using Embedded Web Server
This section describes the initial settings related to security features, and how to set them on the
Embedded Web Server .
Preparations for Settings on the Embedded Web
Server
Prepare a computer supporting the TCP/IP protocol to use the Embedded Web Server .
Embedded Web Server supports the browsers that satisfy TLS conditions.
1. Open your Web browser, enter the TCP/IP address of the machine to the URL bar, and press the
< Enter > key.
2. Select Log In on the Embedded Web Server.
3. Select admin .
4. Enter the password.
5. Select Log In .

Change the System Administrator's Password

1. Select Permissions .
2. Select admin .
3. Select Change Password .
4. Enter the old password in Old Password .
5. Enter the new password in New Password .
6. Enter the new password in Retype New Password .
7. Select OK .

Set EIP

For the secure operation of the machine, follow the procedure below to set EIP to Disabled
1. Select Apps .
2. Select EIP Settings .
3. Disable all services.

Set My Folder

For the secure operation of the machine, follow the procedure below to set My Folder to Disabled
Xerox ® VersaLink ® C405/B405 Multifunction Printer
Security Function Supplementary Guide
12