Introduction; Accessing Error History Report; Error History Report - Xerox Phaser 6128MFP Service Manual

Error Messages and Codes

Introduction

Accessing Error History Report

Error History Report

3-2
This chapter describes error messages and numeric codes displayed on the Control
Panel or listed on the Error History page. These error indications serve as the entry
point into the troubleshooting process.
Troubleshooting of problems not directly indicated by or associated with an error
message or code is covered in Chapter 4, General Troubleshooting. Print quality
problems are covered in Chapter 5, Print Quality Troubleshooting.
The printer tracks and reports errors in a number of ways. The two types of error
reporting discussed in this section include:
• Error messages and codes displayed on the Control Panel
• Engine (fatal) and Jam Error logs displayed on the Control Panel or listed on
the Error History Report
1. From the Control Panel, press the System button.
2. Information Pages is displayed. Press the OK button.
3. Press the Up or Down arrow button to find Error History. Press the OK button.
4. The Error History Report is printed. When printing is finished, the menu is
displayed.
The Error History Report provides a list of error messages and Chain Link codes
relating to Jam and System (fatal) errors. The printer can retain up to 42 Jam
errors and 42 System Fail errors.
Examples of Error message and Chain Link code:
• System Fail History
• Chain Link: 018-310
• Paper Jam History
• Paper Jam Type: IOT Remain Registration Jam
Phaser 6128MFP Service Manual