Controlling The Cli Display; Multi-Screen Display - H3C S5500-HI Series Fundamentals Configuration Manual

To do...
Enter system view
Enter user interface view
Set the maximum number of
commands that can be saved in the
history buffer
NOTE:
For more information about the user-interface and history-command max-size commands, see
Fundamentals Command Reference

Controlling the CLI display

Multi-screen display

Controlling multi-screen display
If the output information spans multiple screens, each screen pauses after it is displayed. Perform one of
the following operations to proceed.
Action
Press Space
Press Enter
Press Ctrl+C
Press <PageUp>
Press <PageDown>
By default, each screen displays up to 24 lines. To change the maximum number of lines displayed on the
next screen, use the screen-length command. For more information about the screen-length command,
see Fundamentals Command Reference.
Disabling multi-screen display
You can use the following command to disable the multi-screen display function. All the output
information will be displayed at one time and the screen will refresh continuously until the last screen is
displayed.
Use the command...
system-view
user-interface { first-num1
[ last-num1 ] | { aux | vty }
first-num2 [ last-num2 ] }
history-command max-size
size-value
.
Function
Displays the next screen.
Displays the next line.
Stops the display and the command execution.
Displays the previous page.
Displays the next page.
10
Remarks
—
—
Optional
By default, the history buffer can
save up to 10 commands.