Lldp Configuration Commands; Display Lldp Local-Information - H3C S7500E Series Command Reference Manual

20

LLDP Configuration Commands

LLDP Configuration Commands

display lldp local-information

Syntax
display lldp local-information [ global | interface interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
global: Displays the global LLDP information to be sent.
interface interface-type interface-number: Displays the LLDP information to be sent out the interface
specified by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI Configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display lldp local-information command to display the LLDP information to be sent, which
will be contained in the LLDP TLVs and sent to neighbor devices.
If no keyword or argument is specified, this command displays all the LLDP information to be sent,
including the global LLDP information and the LLDP information about the LLDP-enabled ports in the
up state.
Examples
# Display all the LLDP information to be sent.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID
System name
System description : System
System capabilities supported : Bridge,Router
System capabilities enabled
: 00e0-fc00-5600
: Sysname
: Bridge,Router
20-1