Lldp Configuration Commands - H3C S3100 Series Command Manual

1

LLDP Configuration Commands

LLDP Configuration Commands
display lldp local-information
Syntax
display lldp local-information [ global | interface interface-type interface-number ]
View
Any view
Parameters
global: Displays the global LLDP information to be transmitted.
interface interface-type interface-number: Displays the LLDP information to be sent out the interface
specified by its type and number.
Description
Use the display lldp local-information command to display the global LLDP information to be
transmitted, which will be contained in the LLDP TLVs and sent to neighbor devices.
If no keyword or argument is specified, this command displays all the LLDP information to be sent,
including the global LLDP information and the LLDP information about the LLDP-enabled ports in the up
state.
Examples
# Display all the LLDP information to be sent.
<Sysname> display lldp local-information
Global LLDP local-information:
Chassis ID
System name
System description : System
System capabilities supported : Bridge
System capabilities enabled
MED information
Device class: Connectivity device
HardwareRev
FirmwareRev
SoftwareRev
SerialNum
Manufacturer name
: 00e0-fc00-5600
: System
: Bridge
: REV.A
: 517
: LANSwitch Ver 1.0
: NONE
: Manufacturer
1-1