Optional) Configuring The Source Ip Address Of Hwtacacs Packets; Optional) Setting The Shared Key Of An Hwtacacs Server - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Security
system-view
The system view is displayed.
Step 2 Run:
hwtacacs-server template template-name
The HWTACACS server template view is displayed.
Step 3 Run:
hwtacacs-server authorization ip-address [ port ]
The IP address of the primary HWTACACS authorization server is configured.
By default, the IP address of the primary HWTACACS authorization server is 0.0.0.0 and the
port number is 0.
Step 4 (Optional) Run:
hwtacacs-server authorization ip-address [ port ] secondary
The IP address of the secondary HWTACACS authorization server is configured.
By default, the IP address of the secondary HWTACACS authorization server is 0.0.0.0 and the
port number is 0.
----End
1.5.6 (Optional) Configuring the Source IP Address of HWTACACS
Packets
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
hwtacacs-server template template-name
The HWTACACS server template view is displayed.
Step 3 Run:
hwtacacs-server source-ip ip-address
The source IP address of HWTACACS packets is configured.
By default, the source IP address of an HWTACACS packet is 0.0.0.0. In this case, the S9300
uses the IP address of the outgoing interface as the source IP address of the HWTACACS packet.
After you specify the source IP address of HWTACACS packets, the specified address is used
for the communication between the S9300 and the HWTACACS server. In this case, the
HWTACACS server uses the specified IP address to communicate with the S9300.
----End

1.5.7 (Optional) Setting the Shared Key of an HWTACACS Server

Issue 06 (2010–01–08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
1-21