Member Device Configuration; Enabling Ndp Globally And For Specific Ports; Enabling Ntdp Globally And For Specific Ports - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Stack&Cluster
Quidway S3100 Series Ethernet Switches
Operation
Configure
internal
host for a cluster
Quit cluster view
Quit system view
II. Configuring a cluster automatically
Table 2-8 Configure a cluster automatically
Operation
Enter system view
Configure a cluster
automatically

2.3 Member Device Configuration

Member device configuration involves:

Enabling NDP globally and for specific ports

Enabling NTDP globally and for specific ports

Enabling the cluster function
2.3.1 Enabling NDP Globally and for Specific Ports
Table 2-9 Enable NDP globally and for specific ports
Operation
Enter system view
Enable
globally
Enable NDP for
specified ports
Enter Ethernet port
view
Enable NDP for the
port
Command
an
SNMP snmp-host ip-address
Quit
Quit
Command
system-view
Auto-build [ recover ]
Command
system-view
NDP
ndp enable
ndp enable
port-list
interface
interface-number
ndp enable
Huawei Technologies Proprietary
2-9
Optional
—
—
—
Required
This is to set up a cluster
based on your instructions.
—
Required
interface
Optional
interface-type
—
Required
Chapter 2 Cluster
Description
Description
Description