Samsung S5PC110 Manual page 1698

S5PC110_UM
10.3.4.24 SPDIFIN Info Register (SPDIFIN_DATA_BUF1_1/2/3)
•
SPDIFIN_DATA_BUF_1_1, R, Address = 0xFA13_0070
•
SPDIFIN_DATA_BUF_1_2, R, Address = 0xFA13_0074
•
SPDIFIN_DATA_BUF_1_3, R, Address = 0xFA13_0078
SPDIFIN_DATA_BUF1_1/2/3
received_data_data_1_1
received_data_data_1_2
received_data_data_1_3
10.3.4.25 SPDIFIN Info Register (SPDIFIN_USER_BUF_1, R, Address = 0xFA13_007C)
SPDIFIN_USER_BUF_1
received_data_user_1
-
Bit
[7:0] Specifies the PCM or stream data for 2nd burst of
HDMI.
[7:0]
SPDIFIN_DATA_BUF_0_1 =
[7:0]
SPDIFIN_DATA_BUF_0[7:0]
SPDIFIN_DATA_BUF_0_2 =
SPDIFIN_DATA_BUF_0[15:8]
SPDIFIN_DATA_BUF_0_3 =
SPDIFIN_DATA_BUF_0[23:16]
If SPDIFIN_CONFIG.data_align is '0' for 16-bit,
received_data is equal to {data_(N)th,
data_(N+1)th}.
If SPDIFIN_CONFIG.data_align is '1' for 32-bit,
received_data is equal to {U, V, C, P, zero-
padding, data[n:0]}.
If SPDIFIN_CONFIG.U_V_P_report is '0',
received_data is equal to {zero-padding,
data[n:0]}.
, where 'n' is dependent on
SPDIFIN_CH_STATUS_1 and word_length if
SPDIFIN_CONFIG. data_type is '0' for PCM.
'n' is equal to 15 if SPDIFIN_CONFIG.data_type
is '1' for stream.
If SPDIFIN_CONFIG.HDMI_burst_size is 1 burst,
HDMI accesses only this data register.
Bit
[7:4] Specifies the user bit of 2nd burst of HDMI
received_data[7:4] = SPDIFIN_DATA_BUF_1[31:28]
[3:0] Reserved
10 9BHIGH-DEFINITION MULTIMEDIA INTERFACE
Description
Description
Initial State
0x00
Initial State
0x0
0x0
10-89