Samsung S5PC110 Manual page 1658

S5PC110_UM
10.3.3.22 Audio Related Packet Register (ASP_CON, R/W, Address = 0xFA11_0160)
ASP_CON
DST_Double
Aud_Type
Aud_Mode
SP_Pre
10.3.3.23 Audio Related Packet Register (ASP_SP_FLAT, R/W, Address = 0xFA11_0164)
ASP_SP_FLAT
-
SP_Flat
Bit
[7] Specifies the DST double.
[6:5] Specifies the packet type instead of audio type.
00 = Audio Sample Packet
01 = One-bit audio packet
10 = HBR packet
11 = DST packet
[4] Selects the two channel or multi-channel mode. This bit is
also used for layout bit in ASP header.
0 = Two channel mode
1 = Multi-channel mode
Set this bit to transmit HBR packets.
[3:0] Controls sub-packet usage for multi-channel mode only.
When using two channel mode, this register value is not
used.
[0]: AUDIO0 control (0: disable, 1: enable)
[1]: AUDIO1 control (0: disable, 1: enable)
[2]: AUDIO2 control (0: disable, 1: enable)
[3]: AUDIO3 control (0: disable, 1: enable)
Bit
[7:4] Reserved
[3:0] Specifies the sp_flat or sample_invalid value for ASP
header. For more information on SP_Flat, refer to the HDMI
specification v1.3 (5.3.4 and 5.3.9).
10 9BHIGH-DEFINITION MULTIMEDIA INTERFACE
Description
Description
Initial State
0
2b00
0
4b0000
Initial State
4b0000
0x0
10-49