Samsung S5PC110 Manual page 1420

S5PC110_UM
6.3.2.4 Common Address Control
Common base address is variously used for each codec. The interpretation of the common base address is
varying. Detailed descriptions are shown in
Base addresses of common 0~63 are defined for AXI_MEMORY_A, and common 64~127 are defined for
AXI_MASTER_B. Base address is determined as follows.
Base address calculation: (MC_DRAMBASE_ADDR) + (MFC_COMMON_BASE_ADDR<<11)
6.3.2.4.1 For Port_A: Common Baseram Register 0 ~ 63
Common Baseram
Register 0 ~ 63
MFC_COMMON_BASE_
ADDR_0 [16:0]
MFC_COMMON_BASE_
ADDR_63 [16:0]
6.3.2.4.2 For Port_B: Common Baseram Register 64 ~ 127
Common Baseram
Register 64 ~ 127
MFC_COMMON_BASE_
ADDR_64 [16:0]
MFC_COMMON_BASE_
ADDR_127 [16:0]
and
6.3.2.5
Address
0xF170_0600 Codec common memory region for start
address.
0xF170_06FC Codec common memory region for start
address.
Address
0xF170_0700 Codec common memory region for start
address.
0xF170_07FC Codec common memory region for start
address.
.
6.3.2.6
Description
~
Description
~
6 5BMULTI FORMAT CODEC
R/W Initial State
R/W X
R/W X
R/W Initial State
R/W X
R/W X
6-28