Samsung S5PC110 Manual page 1691

S5PC110_UM
10.3.4.7 SPDIF Register (SPDIFIN_USER_VALUE_1, R/W, Address = 0xFA13_0020)
SPDIFIN_USER_VALUE_1
repetition_time_manual_low
word_length_manual
10.3.4.8 SPDIF Register (SPDIFIN_USER_VALUE_2, R/W, Address = 0xFA13_0024)
SPDIFIN_USER_VALUE_2
repetition_time_manual_high
Bit
[7:4] Specifies the repetition time[3:0].
Repetition_time_manual register has 12-bits value.
This register is low by 4-bits.
It counts one block of stream data and is valid only if
SPDIFIN_CONFIG.PcPd_value_mode is set for
manual mode.
Unit: frames (1 frame = 2 sub-frames) of SPDIF
format.
The value should be actual repetition time minus
one. For example, if you want to manually set the
repetition time as 1536, you should write 1535.
[3:0] Specifies the word length.
Used as size for transferring data to memory via
HDMI; valid only when
SPDIFIN_CONFIG.word_length_value_mode is set
for manual mode.
For more information, see SPDIFIN_DATA_BUF_x.
[0] is 1 [0] is 0
101: 24-bits
001: 23-bits
010: 22-bits
011: 21-bits
100: 20-bits
Bit
[7:0] Specifies the repetition time[11:4].
Repetition_time_manual register has 12-bits value.
This register is high by 8-bits.
Counts one block of stream data; valid only if
SPDIFIN_CONFIG.PcPd_value_mode is set for
manual mode.
Unit: frames (1 frame = 2 sub-frames) of SPDIF
format
The value should be actual repetition time minus
one. For example, if you want to manually set the
repetition time as 1536, you should write 1535.
10 9BHIGH-DEFINITION MULTIMEDIA INTERFACE
Description
[3:1]
20-bits
19-bits
18-bits
17-bits
16-bits
Description
Initial State
0x0
0x0
Initial State
0x00
10-82