Samsung S5PC110 Manual page 1740

S5PC110_UM
11.7.1.3 Rotator Status Register (STATAUS, R, Address = 0xFA30_0020)
STATREG
Reserved
Interrupt Pending
Interrupt Pending
Reserved
Rotator status
11.7.1.4 Rotator Source Image Base Address Register 0 (SRCBASEADDR0, R/W, Address = 0xFA30_0030)
SRCADDRREG0
SRC_IMG_ADDR
11.7.1.5 Rotator Source Image Base Address Register 1 (SRCBASEADDR1, R/W, Address = 0xFA30_0034)
SRCADDRREG1
SRC_IMG_ADDR
11.7.1.6 Rotator Source Image Base Address Register 2 (SRCBASEADDR2, R/W, Address = 0xFA30_0038)
SRCADDRREG2
SRC_IMG_ADDR
11.7.1.7 Rotator Source Base Image Size Register (SRCIMGSIZE, R/W, Address = 0xFA30_003C)
SRCIMGSIZE
SRC_YSIZE
SRC_XSIZE
Bit
[31:10] Reserved
[9] This bit is set if the SFR set illegally. Writing '1' makes this bit
clear.
[8] This bit is set if an image rotation is complete. Writing '1'
makes this bit clear.
[3:1] Reserved
[1:0] These bits show the rotator operation status.
00 = IDLE status
01 = Reserved
10 = Rotating a image (BUSY)
11 = Rotating a image, and has one more job to rotate (BUSY)
Bit
[31:0] Base address of source image for RGB or Y component
Bit
[31:0] Base Address of source image for Cb component.
Bit
[31:0] Base Address of source image for Cr component.
Bit
[31:16] Vertical pixel size of a source image
[15:0] Horizontal pixel size of a source image
Description
Description
Description
Description
Description
11 10BIMAGE ROTATOR
Initial State
0x00
1b
0b
0x00
00b
Initial State
0x0000_0000
Initial State
0x0000_0000
Initial State
0x0000_0000
Initial State
0x0000
0x0000
11-8