Samsung S5PC110 Manual page 1996

S5PC110_UM
2.3.2.28 HASH and PRNG Control (HASH_IV_4, W, Address = 0xEA00_60AC)
HASH_IV_4
HASH_IV_4
2.3.2.29 HASH and PRNG Control (HASH_IV_5, W, Address = 0xEA00_60B0)
HASH_IV_5
HASH_IV_5
2.3.2.30 HASH and PRNG Control (HASH_PRE_MSG_LENG_HIGH, W, Address = 0xEA00_60C0)
HASH_PRE_MSG
_LENG_HIGH
HASH_PRE_MSG_
LENG_HIGH
2.3.2.31 HASH and PRNG Control (HASH_PRE_MSG_LENG_LOW, W, Address = 0xEA00_60C4)
HASH_PRE_MSG
_LENG_LOW
HASH_PRE_MSG_
LENG_LOW
NOTE:
1.
HASH_CONTROL_1
ENGINE_SELECTION, START_INIT_BIT and USER_IV_EN can be set at the same time.
If custom IVs are used, HASH_IV_1 ~ HASH_IV_5 must be initialized before USER_IV_EN is set.
2.
HASH_CONTROL_2
LAST_WORD and LAST_BYTE_SEL[1:0] are removed from the register map. Instead, HASH_MSG_SIZE_LOW and
HASH_MSG_SIZE_HIGH are added (see below).
Bit
[31:0] Specifies the Custom IV input 4.
Bit
[31:0] Specifies the Custom IV input 5.
Bit
[31:0] Specifies the pre-message length [63:32].
Bit
[31:0] Specifies the pre-message length [31:0].
Description
Description
Description
Description
2 ADVANCED CRYPTO ENGINE
R/W Initial State
-
R/W Initial State
-
R/W Initial State
0
R/W Initial State
0
2-41