Samsung S5PC110 Manual page 1466

S5PC110_UM
6.4.2.4.4 Metadata Start Address (EXT_METADATA_START_ADDR, W, Offset = 0x0044)
EXT_METADATA_START_
ADDR
EXT_METADATA_START_
ADDR
NOTE: The size of EXT_METADATA_START_ADDR buffer is 54words (216bytes).
METADATA_ENABLE and EXT_METADATA_START_ADDR should be set on SEQ_START
6.4.2.4.5 Put Extradata (PUT_EXTRADATA, W, Offset = 0x0048)
PUT_EXTRADATA
Reserved
PUT_EXTRADATA
6.4.2.4.6 Extradata Address Register (EXTRADATA_ADDR, W, Offset = 0x004C)
EXTRADATA_ADDR
EXTRADATA_ADDR
Bit
[31:0] The start address of the metadata memory to
configure the QP, concealed macroblock number,
VC1 parameters, SEI, VUI, and slice size
information
Bit
[31:1] Reserved
[0] Host informs MFC of the existence of extra
metadata for each frame decoding. Valid only if
EXTRADATA_ENABLE is set.
0 = No extra metadata
1 = Extra metadata exists
Bit
[31:0] Host informs MFC of the address of extra metadata.
MFC copies the extra metadata to the shared
memory output. MFC will copy only if
EXTRADATA_ENABLE and PUT_EXTRADATA are
set
6 5BMULTI FORMAT CODEC
Description
Description
Description
Initial State
Undef
Initial State
Undef
Undef
Initial State
Undef
6-74