Samsung S5PC110 Manual page 1465

S5PC110_UM
6.4.2.4 Metadata Control
6.4.2.4.1 Metadata Enable (METADATA_ENABLE, W, Offset = 0x0038)
METADATA_ENABLE
Reserved
EXTRADATA_ENABLE
ENC_SLICE_SIZE_ENA
BLE
VUI_ENABLE
SEI_NAL_ENABLE
VC1_PARAM_ENABLE
CONCEALED_MB_ENA
BLE
QP_ENABLE
NOTE: When QP_ENABLE=1, MFC sets MFC_QP_OUT_EN and MFC_QP_OFFSET internally
METADATA_ENABLE and EXT_METADATA_START_ADDR should be set on SEQ_START
6.4.2.4.2 Metadata Status (METADATA_STATUS, R, Offset = 0x003C)
METADATA_STATUS
Reserved
METADATA_STATUS
6.4.2.4.3 Metadata Display Index (METADATA_DISPLAY_INDEX, R, Offset = 0x0040)
METADATA_DISPLAY_
INDEX
METADATA_DISPLAY_
INDEX
Bit
[31:7] Reserved
[6] 0 = Disable extra metadata
1 = Enable extra metadata
[5] 0 = Disable slice size info
1 = Enable slice size info
[4] 0 = Disable VUI info
1 = Enable VUI info
[3] 0 = Disable SEI NAL info
1 = Enable SEI NAL info
[2] 0 = Disable VC1 parameter store
1 = Enable VC1 parameter store
[1] 0 = Disable concealed macroblock info
1 = Enable concealed macroblock info
[0] 0 = Disable QP info
1 = Enable QP info
Bit
[31:1] Reserved
[0] 0 = Metadata does not exist
1 = Metadata exists
Bit
[31:0] When concealed macroblock or QP is enabled in the
metadata info, it has to return the information of the
displayed frame, not the decoded frame. It returns the
index of metadata in the shared memory.
Description
Description
Description
6 5BMULTI FORMAT CODEC
Initial State
Undef
Undef
Undef
Undef
Undef
Undef
Undef
Undef
Initial State
Undef
Undef
Initial State
Undef
6-73