Show Multiauth Session-Timeout - Enterasys N Standalone (NSA) Series Configuration Manual

14.3.10.14 show multiauth session-timeout

Use this command to display multiple authentication session-timeout values for an active session.
This will display the session-timeout values, in seconds, for the following authentication types:
dot1x, pwa, mac, and cep.
show multiauth session-timeout
Syntax Description
None
Command Type
Switch command.
Command Mode
Read-Only.
Command Defaults
None
Example
This example shows how to display multiple authentication session-timeout values, for an active
session:
Matrix(rw)->show multiauth session-timeout
Authentication type
------------------- -------------
dot1x
pwa
mac
cep
Timeout (sec)
0
0
0
0
Matrix NSA Series Configuration Guide
Security Configuration Command Set
Configuring Multiple Authentication
14-149